All of the GEARBOX products are presented here along with a brief description and pricing info for the USA and Australia.
GEARBOX 2 side boxes come in five different cant angles - 0º, 2º, 4º, 6º, and 8º. Includes a standard or HEX load beam cover.
SKU: GB2-BOX-SIDE-0-PCK, (2, 4, 6, 8)
Sold in packs of 10 boxes (5 sets)
GEARBOX 2 center box is a dedicated box with grub screws on opposing sides of the slot. Includes a standard or HEX load beam cover.
Sold in packs of 5 boxes
SKU: GB2-BOX-SIDE-0, (2, 4, 6, 8)
Sold as a single box
Covers are primarily used to enhance the bond with the bottom lamination. Can be customized with colors and other materials. Standard covers have cant angle markings of either 0º, 2º, 4º, 6º, or 8º on outer edge.
SKU: GB2-SIDE-COVER-0 (2, 4, 6, 8)
Sold as a set of 2 covers
Covers are primarily used to enhance the bond with the bottom lamination. Can be customized with colors and other materials.
Sold as a single (1) cover
Color covers also available - BLACK, GREY, YELLOW, MANGO, RED, BLUE, GREEN, and PURPLE.
SKU: GB2-CLR-SIDE-COVER-BLK (GRY, YLW, MGO, RED, BLU, GRN, and PPL)
Sold as a pair (2) of covers
SKU: GB2-CLR-CTR-COVER-BLK (GRY, YLW, MGO, RED, BLU, GRN, and PPL)
Complete routing system with everything that is needed to install the system.
Includes jigs, router bit, key, and guide
Routing system for a single rout install in low density EPS foam.
Includes base jig, router bit, key, and guide
The router jig set includes all three router jigs that make up the routing system.
Includes base, bottom, and top router jigs
Base jig is the foundation and main positioning part, of the routing system.
Sold as a single (1) jig with rubber pad
Bottom jig is used to rout the lower cavity for the box.
Sold as a single (1) jig
Top jig is used to rout the cavity for the load beam collar.
High quality router bit with a bearing on top of the cutter.
Sold as a single (1) router bit
Allen key for adjusting grub screws, sold in packs of 10.
Sold as a single pack
Convenient pack of 10 spare grub screws for any of the boxes.
Sold as a single (1) pack
Cards with 3 side die cut tapes per card.
Sold as a single card
Cards with 3 center die cut tapes per card.
Includes routing system, 2 sets of boxes (multiple cant angle), center box, die cut tape, and install instructions.
Includes shipping & taxes for one price
Includes 1ROUT routing system, 2 sets of boxes (multiple cant angles), center box, die cut tape, and install instructions.
We have two primary office locations for GEARBOX and Hanalei Fins, Australia and the USA. Contact info is provided below but the preferred contact method is through the CONTACT form on this site.